High resistance to pressure
Extremely tear-resistant lubricating membrane with excellent noise and vibration damping
Good creep properties
- Excellent lubricating properties in small gaps
- Reliable corrosion protection
Adhesive
The lubricant resists the centrifugal force that develops on the rotating and rotating components
Good hardware compatibility
Compatible with O and X cross-section sealing rings, as well as plastics. Neutral behavior on painted substrates.
Resistant to splashes of water, salt water, weak acids and alkalis
Free of resins, acids and silicone
Application area
Suitable for general lubrication and for high pressure loads, e.g. gearshift, throttle and clutch couplings, Bowden ropes, pins, couplings, hinges, reversing levers, lock faces, traction rod ends, sliding rails, sprockets, sprockets and open sprockets
Notice
Resistance to high pressure loads
The HHS 2000 lubrication membrane remains active and does not peel off despite the high pressure load and the shear motion of the base body. It reliably separates the component body from the base body, thus ensuring optimal protection against wear at higher pressure loads. This can only be done in clean areas and for this reason we recommend thorough and careful preparation cleaning with HHS Clean, before applying no.089310610.
The instructions for use are recommendations based on the tests we have performed and our experience. Perform your own tests before each application. We take no responsibility for the outcome of a particular application due to the large number of applications and storage and processing conditions. If the free customer service provides technical information or acts as a consulting service, that service assumes no responsibility except when the advice or services provided fall within the scope of the specified, contractually agreed service or if the consultant acted voluntarily. We guarantee the consistent quality of our products. We reserve the right to execute technical changes and actions for further development of our products.
Application
The surface must be clean, dry and not greasy at all. Before use, shake for 2 minutes and spray from a distance of 25-30cm. Apply several thin layers.
DANGER: Liquid and flammable vapors! Causes serious eye irritation! May cause drowsiness or dizziness! Prolonged exposure may cause dry skin or cracking! If you seek medical advice, have the product container or label with you! Away from children! Away from heat, hot surfaces, sparks, naked flames and other sources of ignition. Do not smoke ! Do not spray near a naked flame or other source of ignition! Wear protective gloves / personal protective equipment for the eyes / face! Do not expose to temperatures above 50 ° C Call the POISON CENTER / doctor if you feel unwell! Tel. Poison Center: 210 7793 777
Reviews
There are no reviews yet